[cisco-voip] Route List reset needed

Bill Riley bill at hitechconnection.net
Thu Dec 30 20:08:38 EST 2010


I know it does not physically restart it, I am just worried about active
calls.

 

From: Cheng, Karen [mailto:Karen.Cheng at racq.com.au] 
Sent: Thursday, December 30, 2010 7:07 PM
To: 'Bill Riley'; 'Adam Frankel (afrankel)'
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Route List reset needed

 

Restarting or resetting an H.323 gateway does not physically restart/reset
the gateway; it only reinitializes the configuration that was loaded by
Cisco Unified Communications Manager. When you reset any other gateway type,
Cisco Unified Communications Manager automatically drops the calls that are
using the gateway. When you restart any other gateway type, Cisco Unified
Communications Manager attempts to preserve the calls that are using the
gateway.

 

Karen Cheng

Voice Engineer

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bill Riley
Sent: Friday, 31 December 2010 11:03 AM
To: 'Adam Frankel (afrankel)'
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Route List reset needed

 

So if I reset the route list does it reset the h.323 gateways in the route
groups and drop the active calls? 

 

Does this behavior change in any newer version? 

 

 

 

From: Adam Frankel (afrankel) [mailto:afrankel at cisco.com] 
Sent: Thursday, December 30, 2010 5:19 PM
To: Bill Riley
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Route List reset needed

 

It will not work without the reset of the route list, unfortunately.

Regards,
Adam 

------------Original Message--------------
From: Bill Riley  <mailto:bill at hitechconnection.net>
<bill at hitechconnection.net>
Sent: Thu, Dec 30, 2010 3:49:47 Pm
To: cisco-voip at puck.nether.net
CC: 
Subject: [cisco-voip] Route List reset needed 

Running CUCM 6.14. I need to change the order of a route list so calls go
through a different gateway first. I know it says I have to reset the route
list but do I really need to? Will it work without the reset? I don't want
to drop the active calls on the gateway. 

 
 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


Buy your loved one the gift of peace of mind with an RACQ gift membership.
Join the Club today at www.racq.com/membership, 13 1905, 24 hours every day
or in store

Please Note: If you are not the intended recipient, please delete this email
as its use is prohibited. RACQ does not warrant or represent that this email
is free from viruses or defects. If you do not wish to receive any further
commercial electronic messages from RACQ please e-mail
unsubscribe at racq.com.au or contact RACQ on 13 19 05.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101230/2bf7d850/attachment.html>


More information about the cisco-voip mailing list