[cisco-voip] Command for determining which dial-peer will be usedon router? (UNCLASSIFIED)

[Girard, Jeffrey COL MIL USA]

Classification: UNCLASSIFIED
Caveats: FOUO

Show voice dialpeer

-----------------------------------------------------------
Jeffrey T. Girard ("Jeff")
COL, 53
Future Forces Integration Directorate (FFID), Deputy - Networks
office:  (915)568-1240  DSN 978
Mobile:  (915)727-4222
reply to:  jeffrey.girard at us.army.mil


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Robert
Kulagowski
Sent: Tuesday, February 02, 2010 9:41 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Command for determining which dial-peer will be
usedon router?

I thought I saw in this list that there's a way to have the router show
you 
which dial-peer is going to be used based on a particular number
pattern. 
Sort of what you see when doing a "deb voip ccapi inout" when it shows
you 
the list of possible "outgoing dial peer=" values.

I'm not trying to test the voice translation-pattern stuff, but the
actual 
DP candidates.

Thanks.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
Classification: UNCLASSIFIED
Caveats: FOUO