[cisco-voip] called number display on calling phone

[Ryan Ratliff]

Then the only way it should be getting back to your phone is in a connected number ie (or remote party id if it's sip). 

You can look at router debugs (h225 asn1, isdn q931, etc) to see if you are getting a connected number IE that includes the digits.   If you are and cannot get it to stop, then you can configure a CUCM service parameter to ignore this IE.

-Ryan

On Feb 8, 2010, at 9:24 AM, O'Brien, Neil wrote:

I’m prepending at the gateway with a translation rule - rule 1 /^0/ /10185/ and applying outbound on the dialpeer.
 
Thanks,
 
Neil

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100208/fb0869f1/attachment.html>