[cisco-voip] Checking hardware -- PRI

[Scott Voll]

show isdn stat shows multiple frames established which makes me still think
it's a Telco issue.  any other ideas?

Scott

ps. I have no mgcp -- mgcp.

On Mon, Feb 15, 2010 at 7:53 AM, Scott Voll <svoll.voip at gmail.com> wrote:

> I have a ticket in with the local telco, but I have a D channel on my PRI
> that is bouncing about every 1-3 minutes.
>
> How do I check to make sure it's not a hardware issue on my side?
>
> it's a 2851 with vwic-2mft-t1=
>
> I see on the controller in the last 24 hours it has 1610 path code
> violations, 9 line code violoations, 2 serverly err secs, and 6 unavail
> secs. but nothing in the current interval.
>
> I have shut not shut the interface but I continue to get RTMT reports that
> the D channel is down(every 1 - 3 minutes).  Router has been up for multiple
> days.(had a power outage last week). but d channel went down yesterday
> afternoon.
>
> What else should I be looking at.
>
> Thanks
>
> Scott
>
> ps. CM 6.1.3 and MGCP.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100215/26687142/attachment.html>