[cisco-voip] Both Lines Speed Dial on a 7940

[Lelio Fulgenzi]

Rather than a speed dial, make it a PLAR. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message ----- 
From: "Jim Reed" <jreed at swiftnews.com> 
To: "cisco-voip" <cisco-voip at puck.nether.net> 
Sent: Wednesday, February 17, 2010 5:04:36 PM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] Both Lines Speed Dial on a 7940 

Anyone know of a way to make both buttons on a 7940 function as speed dials? 
I want to set up a 7940 that no matter which button someone pushes will dial 
the route point for a call center. Everything I can find in Call Manager 
shows that Line 1 always has to be a DN. 

Thank You... 
-- 
Jim Reed 
Swift Communications, Inc. 
970-683-5646 (Direct) 
775-772-7666 (Cell) 

³Did Adam and Eve 
have navels?² 
--Martin Gardner 


_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100217/8b81c0d8/attachment.html>