[cisco-voip] QOS Configuration

[davidytk]

Hi all

 

I want to configured QOS as the following requirement.

 

Queue 1: COS 5 (33%)

Queue 2: COS 3 6 7 (40%)

Queue 3: COS 1 2 4 (20%)

Queue 4: COS 0

 

Also set Queue 1 as 20% traffic for priority queue on F1/0/1

 

I set the following command

 

mls qos srr-queue output cos-map queue 1 threshold 3 5

mls qos srr-queue output cos-map queue 2 threshold 1 3 6 7

mls qos srr-queue output cos-map queue 1 threshold 3 2 4 1

mls qos srr-queue output cos-map queue 1 threshold 1 0

 

int f1/0/1

 queue-set 1

 srr-queue bandwidth shaped 5 0 0 0 (20% for priority queue)

srr-queue bandwidth share 33 40 20 7 (don't know correct or not)

 priority-queu out (not sure need or not)

 mls qos trust dscp

 

Can you point out any mistake or missing for the configuration.

 

Thanks

Best Regards

David Yeung

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100220/14c79b3b/attachment.html>