[cisco-voip] probleme with call via port FXO

[Essaki Ihssan]

This copy of gateway config.

 

 

Router#sh run

Building configuration...

 

 

Current configuration : 1790 bytes

!

version 12.4

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname Router

!

boot-start-marker

boot-end-marker

!

!

no aaa new-model

dot11 syslog

!

!

ip cef

no ip dhcp use vrf connected

!

ip dhcp pool Voice

   import all

   network 10.50.4.0 255.255.255.0

   option 150 ip 10.50.4.254

!

!

multilink bundle-name authenticated

!

!

voice-card 0

 dspfarm

 dsp services dspfarm

 no local-bypass

!

!

voice call carrier capacity active

voice rtp send-recv

!

voice service voip

 allow-connections h323 to h323

 allow-connections h323 to sip

 allow-connections sip to h323

 allow-connections sip to sip

 supplementary-service h450.12

 h323

  no call service stop

!

!

voice class codec 1

 codec preference 1 g711ulaw

!

!

!

voice class h323 1

 h225 timeout tcp establish 3!

!

!

!

archive

 log config

  hidekeys

!

!

!

!

!

!

interface FastEthernet0/0

 ip address 10.50.4.1 255.255.255.0

 duplex auto

 speed auto

!

interface FastEthernet0/1

 no ip address

 shutdown

 duplex auto

 speed auto

!

ip forward-protocol nd

!

!

ip http server

no ip http secure-server

!

!

!

!

control-plane

!

!

!

voice-port 0/0/0

 connection plar opx 63

 caller-id enable

!

voice-port 0/0/1

!

voice-port 0/1/0

!

voice-port 0/1/1

!

ccm-manager mgcp

!

mgcp

!

!

!

dial-peer voice 1 pots

 preference 1

 destination-pattern 905........

 port 0/0/0

 forward-digits 10

!

dial-peer voice 2 pots

 preference 2

 destination-pattern 905........

 port 0/0/1

 forward-digits 10

!

dial-peer voice 100 voip

 destination-pattern ..

 b2bua

 session protocol sipv2

 session target ipv4:10.50.4.254

 dtmf-relay h245-alphanumeric

 no vad

!

!

gateway

 timer receive-rtp 1200

!

!

line con 0

line aux 0

line vty 0 4

 login

!

scheduler allocate 20000 1000

!

end

 

 

De : Mike Thompson [mailto:mthompson729 at gmail.com] 
Envoyé : dimanche 21 février 2010 20:37
À : 'ali mouine'; i.essaki at megasys-maroc.com; cisco-voip at puck.nether.net
Objet : RE: [cisco-voip] probleme with call via port FXO

 

We will need more information to be able to help:

 

1)      Are you talking inbound or outbound calls

2)      A copy of the gateway config

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of ali mouine
Sent: Sunday, February 21, 2010 3:33 PM
To: i.essaki at megasys-maroc.com; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] probleme with call via port FXO

 

 

 

Hi ,

 

Check the codec (G711 and G729) between CUCM and H323 GW, maybe there is a
mismatch codec.

 

 

  _____  

From: i.essaki at megasys-maroc.com
To: cisco-voip at puck.nether.net
Date: Sun, 21 Feb 2010 19:22:05 +0000
Subject: [cisco-voip] probleme with call via port FXO

Hi ;

I installed the cisco MCS 7.0 BE; I can make call in internal, and I
configure the Cisco 2811 like H323 gateway witch I have only 1 card 4xFXO,
my problem is when I call to the external number, it ring once and then it
give me busy ligne.

I need help to configure the FXO port to make external call, and DID .

Thanks.

 

  _____  

Do you want a Hotmail account? Sign-up
<http://clk.atdmt.com/UKM/go/197222280/direct/01/>  now - Free

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100221/4d077e7a/attachment.html>