[cisco-voip] probleme with call via port FXO **** resolue ****

[Essaki Ihssan]

Hi ali mouine.
I add the codec G729, and I work fine.

Thanks lot for all.


-----Message d'origine-----
De : Peter Slow [mailto:peter.slow at gmail.com] 
Envoyé : mardi 23 février 2010 02:13
À : Essaki Ihssan
Cc : Mike Thompson; ali mouine; cisco-voip at puck.nether.net
Objet : Re: [cisco-voip] probleme with call via port FXO

why doesn't your h.323 gateway have any h.323 dial peers?


On Sun, Feb 21, 2010 at 6:01 PM, Essaki Ihssan
<i.essaki at megasys-maroc.com> wrote:
> This copy of gateway config.
>
>
>
>
>
> Router#sh run
>
> Building configuration...
>
>
>
>
>
> Current configuration : 1790 bytes
>
> !
>
> version 12.4
>
> service timestamps debug datetime msec
>
> service timestamps log datetime msec
>
> no service password-encryption
>
> !
>
> hostname Router
>
> !
>
> boot-start-marker
>
> boot-end-marker
>
> !
>
> !
>
> no aaa new-model
>
> dot11 syslog
>
> !
>
> !
>
> ip cef
>
> no ip dhcp use vrf connected
>
> !
>
> ip dhcp pool Voice
>
>    import all
>
>    network 10.50.4.0 255.255.255.0
>
>    option 150 ip 10.50.4.254
>
> !
>
> !
>
> multilink bundle-name authenticated
>
> !
>
> !
>
> voice-card 0
>
>  dspfarm
>
>  dsp services dspfarm
>
>  no local-bypass
>
> !
>
> !
>
> voice call carrier capacity active
>
> voice rtp send-recv
>
> !
>
> voice service voip
>
>  allow-connections h323 to h323
>
>  allow-connections h323 to sip
>
>  allow-connections sip to h323
>
>  allow-connections sip to sip
>
>  supplementary-service h450.12
>
>  h323
>
>   no call service stop
>
> !
>
> !
>
> voice class codec 1
>
>  codec preference 1 g711ulaw
>
> !
>
> !
>
> !
>
> voice class h323 1
>
>  h225 timeout tcp establish 3!
>
> !
>
> !
>
> !
>
> archive
>
>  log config
>
>   hidekeys
>
> !
>
> !
>
> !
>
> !
>
> !
>
> !
>
> interface FastEthernet0/0
>
>  ip address 10.50.4.1 255.255.255.0
>
>  duplex auto
>
>  speed auto
>
> !
>
> interface FastEthernet0/1
>
>  no ip address
>
>  shutdown
>
>  duplex auto
>
>  speed auto
>
> !
>
> ip forward-protocol nd
>
> !
>
> !
>
> ip http server
>
> no ip http secure-server
>
> !
>
> !
>
> !
>
> !
>
> control-plane
>
> !
>
> !
>
> !
>
> voice-port 0/0/0
>
>  connection plar opx 63
>
>  caller-id enable
>
> !
>
> voice-port 0/0/1
>
> !
>
> voice-port 0/1/0
>
> !
>
> voice-port 0/1/1
>
> !
>
> ccm-manager mgcp
>
> !
>
> mgcp
>
> !
>
> !
>
> !
>
> dial-peer voice 1 pots
>
>  preference 1
>
>  destination-pattern 905........
>
>  port 0/0/0
>
>  forward-digits 10
>
> !
>
> dial-peer voice 2 pots
>
>  preference 2
>
>  destination-pattern 905........
>
>  port 0/0/1
>
>  forward-digits 10
>
> !
>
> dial-peer voice 100 voip
>
>  destination-pattern ..
>
>  b2bua
>
>  session protocol sipv2
>
>  session target ipv4:10.50.4.254
>
>  dtmf-relay h245-alphanumeric
>
>  no vad
>
> !
>
> !
>
> gateway
>
>  timer receive-rtp 1200
>
> !
>
> !
>
> line con 0
>
> line aux 0
>
> line vty 0 4
>
>  login
>
> !
>
> scheduler allocate 20000 1000
>
> !
>
> end
>
>
>
>
>
> De : Mike Thompson [mailto:mthompson729 at gmail.com]
> Envoyé : dimanche 21 février 2010 20:37
> À : 'ali mouine'; i.essaki at megasys-maroc.com; cisco-voip at puck.nether.net
> Objet : RE: [cisco-voip] probleme with call via port FXO
>
>
>
> We will need more information to be able to help:
>
>
>
> 1)      Are you talking inbound or outbound calls
>
> 2)      A copy of the gateway config
>
>
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of ali mouine
> Sent: Sunday, February 21, 2010 3:33 PM
> To: i.essaki at megasys-maroc.com; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] probleme with call via port FXO
>
>
>
>
>
>
>
> Hi ,
>
>
>
> Check the codec (G711 and G729) between CUCM and H323 GW, maybe there is a
> mismatch codec.
>
>
>
>
>
> ________________________________
>
> From: i.essaki at megasys-maroc.com
> To: cisco-voip at puck.nether.net
> Date: Sun, 21 Feb 2010 19:22:05 +0000
> Subject: [cisco-voip] probleme with call via port FXO
>
> Hi ;
>
> I installed the cisco MCS 7.0 BE; I can make call in internal, and I
> configure the Cisco 2811 like H323 gateway witch I have only 1 card 4xFXO,
> my problem is when I call to the external number, it ring once and then it
> give me busy ligne.
>
> I need help to configure the FXO port to make external call, and DID .
>
> Thanks.
>
>
>
> ________________________________
>
> Do you want a Hotmail account? Sign-up now - Free
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>