[cisco-voip] how to force CAD agent to ready status

Scott Kee SKee at cmsstl.com
Tue Feb 23 18:39:30 EST 2010


Bummer...


-----Original Message-----
From: Matthew Loraditch [mailto:MLoraditch at heliontechnologies.com] 
Sent: Tuesday, February 23, 2010 5:25 PM
To: Scott Kee; cisco-voip at puck.nether.net
Subject: RE: how to force CAD agent to ready status

I agree with Ed, we asked Cisco about this and they said not possible


Matthew Loraditch, CCNA
1965 Greenspring Drive
Timonium, MD 21093 
support at heliontechnologies.com
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com 
Support Issue? Email support at heliontechnologies.com for fast assistance!


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Kee
Sent: Tuesday, February 23, 2010 6:17 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] how to force CAD agent to ready status

I need to reprogram my company's Helpdesk script.  I will use skill based routing.

I am creating 2 CSQs.  When the 1st queue is full I want the call to be routed to the 2nd queue.  If agents are ready, answer the call... however I want to force the logged-in but not ready agents to READY status if all the agents in the 2nd queue is full.

What step do I have to use in the script to accomplish this?

 

thanks for your help.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


More information about the cisco-voip mailing list