[cisco-voip] CCm 7.1.2 - SCCP 9.0.2

[Ryan Ratliff]

You don't upload the file to TFTP directly (like you could with the zip file and Windows).  The cop.sgn file is applied like a CUCM software upgrade and that installer will copy the files and update device defaults.   The only other step you need after that is to bounce TFTP.

-Ryan

On Feb 26, 2010, at 1:38 PM, cisco.voip wrote:

After you upload the file to the tftp directory and the restart TFTP, at this point device defaults is not updated.
Do I need to reboot the Pub to make it happen

On 2/26/2010 8:12 AM, Ed Leatherman wrote:
> When you install the firmware file  - .cop i think now? still working
> on my morning coffee - it should update the device default page with
> that version.
> 
> On Fri, Feb 26, 2010 at 12:36 AM, cisco.voip<cisco.voip at verizon.net>  wrote:
>   
>> Cisco-Voip group
>> When I copy the newest sccp load to ccm 7.1.2, do I have to manually update
>> the device default page.
>> I am used to running the .exe on ccm4.12. where the install immediately
>> converted the device default to the new load.
>> 
>> I don't see the mechanisn in 7.1.2 to automatically update  the default
>> device load entry?
>> 
>> Thanks,
>> 
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>> 
>>     
> 
> 
>   
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip