[cisco-voip] How to select outgoing analog port according to calling number

Mike Thompson mthompson729 at gmail.com
Tue Jan 5 13:16:34 EST 2010


I just saw Jason's post, CoR is the only way that I can confirm it would
work.

 

In my mind, though, I'm thinking something revolving around the 'calling
party number' parameter on a dial peer.but I've never done it that way.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ki Wi
Sent: Tuesday, January 05, 2010 1:00 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] How to select outgoing analog port according to
calling number

 

Hi All, 
this will be my first time doing analogue technology with CME. 

I have a customer who intend to classify a couple of phones together to use
line 1 to 5 for outgoing calls,
while a "special" sales person will use analog line 6  (this is actually his
DID number), so connection plar will be configured for this special person. 

I'm wondering how to I prevent this special person from using line 1 to 5
for outgoing call when he press 9.T

The way I can think of now is to use COR (class of restriction), is this
correct ? Or there is some other way to do it?

Cheers,
Ki Wi

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100105/cafd3aca/attachment.html>


More information about the cisco-voip mailing list