[cisco-voip] 7985 cannot dial out...

[Jonathan Charles]

will that kill faxing?

On Sun, Jan 10, 2010 at 5:32 PM, Chris Soechting <CSoechting at inxi.com>wrote:

>  Try this on your voice port:
>
>
>
> bearer-cap Speech
>
>
>
> *Chris Soechting, CCIE #15782*
>
> Senior Consulting Engineer
>
> Single Number Reach: 512-795-7107
>
> www.INXI.com <http://www.inxi.com/>
>
>
>
>  [image: INX_Logo_Email]
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Jonathan Charles
> *Sent:* Sunday, January 10, 2010 2:56 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] 7985 cannot dial out...
>
>
>
> OK, I have a 7985, configured identically to a 7962, the 62 can call
> everywhere... the 7985 cannot.
>
> We see the following in the ISDN debugs:
>
>    Cause i = 0x82B2 - Requested facility not subscribed
>
> Which indicates to me that it is trying to make a video call to the PSTN
> and making telco mad.
>
>
>
> *Jan 10 20:51:12.185: ISDN Se0/0/1:23 Q931: pak_private_number: Invalid
> type/plan 0x0 0x0 may be overriden; sw-type 13
> *Jan 10 20:51:12.189: ISDN Se0/0/1:23 Q931: Applying typeplan for sw-type
> 0xD is 0x2 0x1, Calling num 3129623819
> *Jan 10 20:51:12.189: ISDN Se0/0/1:23 Q931: Sending SETUP  callref = 0x00CF
> callID = 0x8050 switch = primary-ni interface = User
> *Jan 10 20:51:12.189: ISDN Se0/0/1:23 Q931: TX -> SETUP pd = 8  callref =
> 0x00CF
>         Bearer Capability i = 0x8890
>                 Standard = CCITT
>                 Transfer Capability = Unrestricted Digital
>                 Transfer Mode = Circuit
>                 Transfer Rate = 64 kbit/s
>         Channel ID i = 0xA98397
>                 Exclusive, Channel 23
>         Facility i = 0x9F8B0100A11202010C020100800A546F6D20646547726F68
>                 Protocol Profile =  Networking Extensions
>                 0xA11202010C020100800A546F6D20646547726F68
>                 Component = Invoke component
>                         Invoke Id = 12
>                         Operation = CallingName
>                                 Name Presentation Allowed Extended
>                                 Name = Tom deGroh
>         Calling Party Number i = 0x2181, '3125553879'
>                 Plan:ISDN, Type:
> HTACHI525a#National
>         Called Party Number i = 0x80, '16305551234'
>                 Plan:Unknown, Type:Unknown
> *Jan 10 20:51:12.441: ISDN Se0/0/1:23 Q931: RX <- CALL_PROC pd = 8  callref
> = 0x80CF
>         Channel ID i = 0xA98397
>                 Exclusive, Channel 23
> HTACHI525a#
> *Jan 10 20:51:13.773: ISDN Se0/0/1:23 Q931: RX <- ALERTING pd = 8  callref
> = 0x80CF
> *Jan 10 20:51:13.973: ISDN Se0/0/1:23 Q931: RX <- DISCONNECT pd = 8
> callref = 0x80CF
>         Cause i = 0x829F - Normal, unspecified
> *Jan 10 20:51:13.977: ISDN Se0/0/1:23 Q931: TX -> RELEASE pd = 8  callref =
> 0x00CF
> *Jan 10 20:51:14.001: ISDN Se0/0/1:23 Q931: RX <- RELEASE_COMP pd = 8
> callref = 0x80CF
> *Jan 10 20:51:14.009: ISDN Se0/0/0:23 Q931: pak_private_number: Invalid
> type/plan 0x0 0x0 may be overriden; sw-type 13
> *Jan 10 20:51:14.009: ISDN Se0/0/0:23 Q931: Applying typeplan for sw-type
> 0xD is 0x2 0x1, Calling num 3129623819
> *Jan 10 20:51:14.013: ISDN Se0/0/0:23 Q931: Sending SETUP  callref = 0x00D0
> callID = 0x8051 switch = primary-ni interface = User
> *Jan 10 20:51:14.013: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8  callref =
> 0x00D0
>         Bearer Capability i = 0x8890
>                 Standard = CCITT
>                 Transfer Capability = Unrestricted Digital
>                 Transfer Mode = Circuit
>                 Transfer Rate = 64 kbit/s
>         Channel ID i = 0xA98397
>                 Exclusive, Channel 23
>         Facility i = 0x9F8B0100A11202010D020100800A546F6D20646547726F68
> HTACHI525a#
>                 Protocol Profile =  Networking Extensions
>                 0xA11202010D020100800A546F6D20646547726F68
>                 Component = Invoke component
>                         Invoke Id = 13
>                         Operation = CallingName
>                                 Name Presentation Allowed Extended
>                                 Name = John Doe
>         Display i = 'Tom deGroh'
>         Calling Party Number i = 0x2181, '3125553879'
>                 Plan:ISDN, Type:National
>         Called Party Number i = 0x80, '16305551234'
>                 Plan:Unknown, Type:Unknown
> *Jan 10 20:51:14.093: ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8
> callref = 0x80D0
>         Cause i = 0x82B2 - Requested facility not subscribed
> HTACHI525a#term no mon
>
>
> It is clearly trying the first PRI, getting denied (but with normal call
> clearing????) and then tries again and then denied on a different reason....
>
> Gateway is H323 with CUCM 7.1.3-31900
>
>
>
> Jonathan
>
> IMPORTANT/CONFIDENTIAL: This message from INX Inc. is intended only for the use of the addressees shown above.
> It contains information that may be privileged, confidential and/or exempt from disclosure under applicable law.
> If you are not the intended recipient of this message, you are hereby notified that the copying, use or distribution of any information or materials transmitted in or with this message is strictly prohibited.
> If you received this message by mistake, please immediately email or call us collect at (469) 549-3800 and delete/destroy the original message.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100110/40ce1d41/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 5297 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100110/40ce1d41/attachment.jpe>