[cisco-voip] call forwarding error

george.hendrix at l-3com.com george.hendrix at l-3com.com
Mon Jan 11 10:31:30 EST 2010


I'll bet an internal number calling an internal number can forward long
distance with no problem.

 

Bill Hendrix

 

george.hendrix at l-3com.com

EITS Service Desk: 1-800-871-9983

Service Desk email: L-3IT.Help at l-3com.com
<mailto:L-3IT.Help at l-3com.com/omailto:L-3IT.Help at l-3com.com> 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Monday, January 11, 2010 10:19 AM
To: Leslie Meade
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] call forwarding error

 

What does the full q931 debug look like of a forwarded call that fails?
Are you sending redirecting IE outbound by any chance?  

 

-Ryan

 

On Jan 8, 2010, at 11:15 AM, Leslie Meade wrote:





Yea, on my 7 box it is set to the line CSS, that CSS can call long
distance.

 

 

From: Scott Voll [mailto:svoll.voip at gmail.com] 
Sent: Friday, January 08, 2010 8:12 AM
To: Leslie Meade
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] call forwarding error

 

I'm guessing you have already looked, but what CSS is your CFwdAll set
to?

 

Scott

On Fri, Jan 8, 2010 at 6:02 AM, Leslie Meade <lmeade at signal.ca> wrote:

It seems that no one is able to call forward their phones from either
cluster (4.2 or 7.1), to a long distance number. Callforwading to a
local number there are no issues.


When any external callers call into the system, they will either get the
number is not connected message, fast busy signal, or another provider
message, internal users can also get this problem.

 

The debugs of the routers show that the primary voice gateway is
reporting issues but I am unable to resolve it

 

pak_private_number: Invalid type/plan 0x2 0x8 may be overriden; sw-type
13

 

I do not get this error when I dial any long distance calls...

 

I have tested by routing the long distance calls out other local and
remote gateways where the number is still long distance, and the call is
completed. The remote gateways do not use the same telco.

 

I have looked at mapping isdn address on the H.323 gateway to isdn map
address 1604484XXXX(example) type national plan national and other types
of plans, types and get the same result of failure.

 

I have looked at the route pattern on the 7 box and changed the
Transformations from Call manager to ISDN, that did not help.

 

Could this be a Telco issue that is not allowing us to hairpin the call
to the long distance? If so why internal calls get the same problem ?

Ideas ?

 

 

Leslie

 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100111/c566b9ea/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 3056 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100111/c566b9ea/attachment.png>


More information about the cisco-voip mailing list