[cisco-voip] MGCP Gateway Keepalives

[Mark Holloway]

Is this what you are looking for?

http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/admin/srst/configuration/guide/srs_wlan.html#wp1335081


On Jan 13, 2010, at 10:09 AM, Jason Shearer wrote:

> By default MGCP keepalives are sent every 15 seconds and it fails over after 30 seconds of no response.  Anyone know where these timer are configured?  Can’t find anything in the mgcp or ccm-manager commands or UCM service parameters (they are a little non-descript).  I’d like to have a couple of gateways send KAs every 5 seconds…..  TAC was worthless in helping.
>  
> Failover Interval:              30 seconds
> Keepalive Interval:             15 seconds
>  
> Thanks!
>  
> Jason
>  
> 
> *** NOTICE--The attached communication contains privileged and confidential information. If you are not the intended recipient, DO NOT read, copy, or disseminate this communication. Non-intended recipients are hereby placed on notice that any unauthorized disclosure, duplication, distribution, or taking of any action in reliance on the contents of these materials is expressly prohibited. If you have received this communication in error, please delete this information in its entirety and contact the Amedisys Privacy Hotline at 1-866-518-6684. Also, please immediately notify the sender via e-mail that you have received this communication in error. ***
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100113/c995ed43/attachment.html>