[cisco-voip] Patch Panel suggestions for VG224

[Steve Sarrick]

I use an Ortronics panel from Graybar. OR-808004921 is the part number.
One of those and an Amphenol patch (OR-804025PP005-1GY) cable will work
just fine.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jeff Garvas
Sent: Monday, January 18, 2010 9:52 AM
To: VOIP Group
Subject: [cisco-voip] Patch Panel suggestions for VG224

 


Does anyone have any patch panels they like that work with the VG224?

I'm looking for something to break it out in a 19" cabinet where I can
use patch cables to patch VG224 ports into an existing IDF.   In the
past I've had it broken out to a 66 block and cross connected into
existing house cable between 66 blocks.

This design is a little different and I'm wondering if anyone has found
a panel I can plug the 25 pair cable into directly and have it line up
properly in the center two pins without breaking it out and punching it
down manually?  I'm thinking I may not find a cable that breaks out the
amphenol connector to 24 RJ45 style jacks properly.

Thanks,

-Jeff







-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100118/774f0c12/attachment.html>