[cisco-voip] Number of rings before forwarding to voicemail

[Cristobal Priego]

If you have cucm and if you want to do it for a specific user go to  
the dn config mode and look for ring no answer duration in seconds  
change the setting there
If you want to do itin bulk go to service parameters, ccm service and  
look for forward no answer time

Sent from my iPhone

On Jan 20, 2010, at 9:41 AM, Bill Hill <bahill at containerstore.com>  
wrote:

> Can anyone tell where the setting is to decrease the number of rings  
> before the call is sent to voicemail.
>
>
>
> Bill Hill
>
> IS Platforms, The Container Store
>
> 500 Freeport Parkway Ste. 100
>
> Coppell, Texas 75019
>
> (Phone) 972-538-6778 (Fax) 972-538-7778
>
>
>
> "This email message, including any attachments, is for the sole use  
> of the  intended recipients and may contain confidential and  
> privileged information. Unauthorized use, disclosure or distribution  
> of this email is strictly forbidden. If you have received this  
> message in error, please reply to the above sender notifying them of  
> this error, and then kindly delete the message."
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100120/16e3be55/attachment.html>