[cisco-voip] CUCM v7 and Microsoft's UM

[Chris Ward (chrward)]

The message button simply dials the VM pilot number. The handling of the
call after that is up to exchange. I believe exchange does that by
default. If not, I suspect that the calling number (phone that hit the
Messages button) isn't matching a mailbox(phone number) in the exchange
system.

 

Someone with more exchange experience might be able to provide more
guidance however.

 

-Chris

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Cooke, Ethen
Sent: Thursday, January 21, 2010 1:47 PM
To: 'cisco-voip at puck.nether.net'
Subject: [cisco-voip] CUCM v7 and Microsoft's UM

 

Is there a way to map the messages button on a 7960 to access
Microsoft's exchange mailbox without entering extension. I want to be
able to enter a password only. Thx ec 

 

 

  <http://www.babc.com/> 

 

________________________________

Ethen Cooke
Communications Administrator

________________________________

Phone 615-252-3836
Fax   615-252-6380
Email  ecooke at babc.com

________________________________

Roundabout Plaza
1600 Division Street, Suite 700
Nashville, TN 37203

 

 

________________________________


CONFIDENTIALITY NOTICE: This e-mail and any attachments are confidential
and may also be privileged. If you are not the named recipient, please
notify the sender immediately and delete the contents of this message
without disclosing the contents to anyone, using them for any purpose,
or storing or copying the information on any medium.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100121/bf39fe47/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 4024 bytes
Desc: image001.gif
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100121/bf39fe47/attachment.gif>