[cisco-voip] Title: CUE - ISM on 2921 CUE FAILED (downhard) to reload after Wizard Complete failure to boot properely

[Gregory Wenzel]

As I am on the phone with tac there is an unofficial mention of a bug with
itegrating cue with an ism sme module with CUCMBE7.1.x
You run the wizard, then it wants to reload and you get complete reload
failure...

anyone see this know of a fix besides do a complete reload of all 5
installer files.

See actual message below:

Initializing memory. Please wait...
Memory initialization OK. Continue...
DDR Memory 0512 MB detected
Genuine Intel(R) processor              1.06GHz
BIOS ISM 2.6,  BIOS Build date: 10/16/2009
System now booting...

Authenticating boot loader....

Secondary Boot Loader authenticated - booting....

Please enter '***' to change boot configuration:
Detect and Initialze network device

Backup current platform configurations....
SRE step 1 - SM registration...
Response - no installation needed (len: 422)
SRE Installation Not Needed
Loading disk:/bzImage ... done.
*Jan 23 20:30:53.063: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP
Registration RequestVerifying ... done.
Starting Kernel.
Platform: ism
ÿÿsd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
Verifying application level programs
Signature Verified
Signature Verified
Signature Verified
Signature Verified
Signature Verified
Signature Verified
Signature Verified
Signature Verified
Signature Verified
Signature Verified
Signature Verified
Signature Verified
Errors for telephony_infrastructure_manifest:
        Checksum mismatch on : /usr/wfavvid/jtapi.jar
Application level programs verification FAILED!
rebooting ...
Restarting system.
Then is just loops

TIA.... help
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100123/d848f605/attachment.html>