[cisco-voip] SysMGMT int on MCS7825I4 usable?

[Bill Hill]

HP ilo is available on all models but the advanced features is standard on 7835/45 and a available option for the 7825. The advanced ilo gives you a remote console which I've used many times to build a CUCM from bare metal remotely. We use HP for all of our servers so we bought an adv ilo site license. I think it is about $250.00 per box. You can set ilo up to report to an management server.

Thanks,

Bill Hill
IS Platforms, The Container Store
500 Freeport Parkway Ste. 100
Coppell, Texas 75019
(Phone) 972-538-6778 (Fax) 972-538-7778


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Shearer
Sent: Friday, January 22, 2010 7:08 AM
To: ciscozest
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] SysMGMT int on MCS7825I4 usable?

We don't have any 7825s but all of our 35s and 45s have it.  There is a port that is built into the system board but there is an enabler card that snaps onto the system board.  It is about 2.5" wide and 6" long.  Has a big chip on it that says IBM.

Jason

-----Original Message-----
From: ciscozest [mailto:ciscozest at gmail.com]
Sent: Friday, January 22, 2010 6:52 AM
To: Jason Shearer
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] SysMGMT int on MCS7825I4 usable?

Hi,
I am not sure about RSA card since there is no additional hardware in
the server box (MCS7825-I4). With HP MCS server, we can use iLO
interface right away. If this card is mandatory for getting remote
management works with MCS IBM server, would it be included when we
purchased MCS server (IBM model)?

thanks,
Denny


Jason Shearer wrote:
> Are you talking about the RSA card?  If so it can be used.  You can either configure it through the BIOS or you can connect directly to it to configure.  Default IP is 192.168.70.125.  Username = USERID Password = PASSW0RD (the 0 is a zero).
>
> Comes in very handy.  None of my MCS servers have a KVM attached....just network, power and RSA.
>
> Jason
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of ciscozest
> Sent: Friday, January 22, 2010 4:33 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] SysMGMT int on MCS7825I4 usable?
>
> HI all,
>
> I am new to IBM server and wondering if we can use the port SysMGMT
> (Slot 1) on MCS782I4 server. I have configured the static ip for the
> Baseboard management Controller (BMC) but the port remain in DOWN state.
> I expect this port can act same as iLO port on HP server but fails.
>
> The server spec from cisco.com said the remote management is RIS II (IBM
> model) is not available while the HP server spec (MCS7825H4) said the
> iLO is supported but optional.
> Can anyone enlighten me? thanks
>
> Denny
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> *** NOTICE--The attached communication contains privileged and confidential information. If you are not the intended recipient, DO NOT read, copy, or disseminate this communication. Non-intended recipients are hereby placed on notice that any unauthorized disclosure, duplication, distribution, or taking of any action in reliance on the contents of these materials is expressly prohibited. If you have received this communication in error, please delete this information in its entirety and contact the Amedisys Privacy Hotline at 1-866-518-6684. Also, please immediately notify the sender via e-mail that you have received this communication in error. ***
>
>

*** NOTICE--The attached communication contains privileged and confidential information. If you are not the intended recipient, DO NOT read, copy, or disseminate this communication. Non-intended recipients are hereby placed on notice that any unauthorized disclosure, duplication, distribution, or taking of any action in reliance on the contents of these materials is expressly prohibited. If you have received this communication in error, please delete this information in its entirety and contact the Amedisys Privacy Hotline at 1-866-518-6684. Also, please immediately notify the sender via e-mail that you have received this communication in error. ***
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
########################################################################
"This email message, including any attachments, is for the sole use of the intended recipients and may contain confidential and privileged information.  Unauthorized use, disclosure or distribution of this email is strictly forbidden.  If you have received this message in error, please reply to the above sender notifying them of this error, and then kindly delete the message."
########################################################################