[cisco-voip] Title: CUE - ISM on 2921 CUE FAILED (downhard) to reload after Wizard Complete failure to boot properely

Gregory wenzel gwenzit at gmail.com
Tue Jan 26 00:39:40 EST 2010


Cisco Tac response was awesome !
Wanted to post that...

I am cucmbe7.1.3.20000-2....
That's my call agent it failed on.... Tried cue 7.1.2 failed...cue 7.1.4  also fails  thre is no .3 avail on web site

-----Original Message-----
From: Lelio Fulgenzi <lelio at uoguelph.ca>
Sent: Monday, January 25, 2010 9:13 PM
To: Gregory wenzel <gwenzit at gmail.com>
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Title: CUE - ISM on 2921 CUE FAILED (downhard) to reload after Wizard Complete failure to boot properely

Can you post the bug? Is it just CUCMBE or CUCM as well?

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt


----- Original Message -----
From: "Gregory wenzel" <gwenzit at gmail.com>
To: "Gregory Wenzel" <gwenzit at gmail.com>, cisco-voip at puck.nether.net
Sent: Monday, January 25, 2010 8:58:23 PM GMT -05:00 US/Canada Eastern
Subject: Re: [cisco-voip] Title: CUE - ISM on 2921 CUE FAILED (downhard) to reload after Wizard Complete failure to boot properely

Found out that cue ism module built as ccm integration has a jtapi bug. There is no fix u have to remiage to cme... This is only on new G2 isr gw with ism cue.....

Thought to share this with the group...

From: Gregory Wenzel <gwenzit at gmail.com>
Sent: Saturday, January 23, 2010 5:22 PM
To: cisco-voip at puck.nether.net
Subject: Title: CUE - ISM on 2921 CUE FAILED (downhard) to reload after Wizard Complete failure to boot properely

As I am on the phone with tac there is an unofficial mention of a bug with itegrating cue with an ism sme module with CUCMBE7.1.x
You run the wizard, then it wants to reload and you get complete reload failure...
 
anyone see this know of a fix besides do a complete reload of all 5 installer files.
 
See actual message below:
 
Initializing memory. Please wait...
Memory initialization OK. Continue...
DDR Memory 0512 MB detected
Genuine Intel(R) processor              1.06GHz
BIOS ISM 2.6,  BIOS Build date: 10/16/2009
System now booting...
 
Authenticating boot loader....  

Secondary Boot Loader authenticated - booting....  
 
Please enter '***' to change boot configuration:
Detect and Initialze network device

Backup current platform configurations....
SRE step 1 - SM registration...
Response - no installation needed (len: 422)
SRE Installation Not Needed
Loading disk:/bzImage ... done.
*Jan 23 20:30:53.063: %SM_INSTALL-6-INST_RBIP: ISM0/0 received msg: RBIP Registration RequestVerifying ... done.
Starting Kernel.
Platform: ism
ÿÿsd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
Verifying application level programs
Signature Verified
Signature Verified
 Signature Verified
Signature Verified
Signature Verified
Signature Verified
Signature Verified
Signature Verified
Signature Verified
Signature Verified
Signature Verified
Signature Verified
Errors for telephony_infrastructure_manifest:
         Checksum mismatch on : /usr/wfavvid/jtapi.jar
Application level programs verification FAILED!
rebooting ...
Restarting system.
Then is just loops
 
TIA.... help
_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100126/afea36cf/attachment.html>


More information about the cisco-voip mailing list