[cisco-voip] CME 7.1 Conf button > No Line Available

[Jason Aarons (US)]

That was it, kinds sucks I have to do a no ephone-dn x, then
re-assoicate button to ephone afterwards.  Wish I could bulk edit these.
I see octo-line is also a option.

 

No ephone-dn 44

ephone-dn 44 dual-line

 number 4032

 des Euince Lee

 call-forward busy 4199

 call-forward noan 4199 timeout 16

 hold-alert 30 originator

!

ephone 44

 username "ELee" password 12345

 mac-address 0019.55FB.3487

 type 7961

 button  1:44

 

 

 

From: Patrick Aland [mailto:paland at gmail.com] 
Sent: Friday, January 29, 2010 1:35 PM
To: Jason Aarons (US)
Subject: Re: [cisco-voip] CME 7.1 Conf button > No Line Available

 

when you configure the ephone-dn X you have to specify "dual-line" i
believe 

On Jan 29, 2010, at 1:32 PM, Jason Aarons (US) wrote:





In CallManager Express I call another 7961, hit Confrn softkey button
and get No Line Available?

 

Do I need to put a second line on each phone, or can't a 7961 DN in CME
handle multiple calls? Or is there a setting I'm missing?

 

________________________________

 

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100129/d325499e/attachment.html>