[cisco-voip] SIP Diversion on CUCM7

[Phil G]

The "description" should be the "displayed name" or the "alerting name" 
of the line, so try to change this values.

To change the user portion of the URI i am afraid you have to use a 
CUBE. I had the same problem and was able to solve it with a sip-profile 
in a CUBE.

HTH

PG


Mark Holloway wrote:

> Let me clarify.  
> 
> Diversion: 
> "*7024101040*"<sip:*7024101040*@192.168.1.254>;privacy=off;reason=unconditional;screen=yes
> 
> 7024101040 instead of 1040 in the description and user portion of the URI.
> 
> 
> 
> On Jul 1, 2010, at 12:00 PM, Mark Holloway wrote:
> 
>> When a PSTN call comes into a SIP Trunk on UCM and the phone has call 
>> forwarding enabled back to the PSTN, the UCM SIP Trunk is setting the 
>> From number in SIP Diversion header as the 4 digit extension rather 
>> than the an external phone mask.  Is there a way to force UCM to send 
>> the 10 digit number (external mask) in SIP Diversion instead of the 4 
>> digit extension?
>>
>>
>> Current:
>>
>> Diversion: 
>> "1040"<sip:1040 at 192.168.1.254>;privacy=off;reason=unconditional;screen=yes
>>
>>
>>
>> I would like it to use the external mask instead:
>>
>> Diversion: 
>> "7024101040"<sip:1040 at 192.168.1.254>;privacy=off;reason=unconditional;screen=yes
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip