[cisco-voip] BRI Problem

[Nicholas Samios]

The telco is rejecting your setup as you're sending call stack as alaw, Japan uses ulaw.

Conf t
Voice-port slot/port:D
Compand-type u-law


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of H, Tim
Sent: Friday, July 09, 2010 7:44 PM
To: cisco-voip
Subject: [cisco-voip] BRI Problem

Any good ideas on this one?  CUCM 7.13 w/MGCP 2911 gateway using Japan, NTT, BRI Interfaces.  I'm able to make inbound calls with no issues.  Outbound gives me this and then fast busy:

003607: Jul  9 09:52:58.795 UTC: ISDN BR0/0/0 Q931: TX -> SETUP pd = 8  callref = 0x01
        Sending Complete
        Bearer Capability i = 0x8090A3
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0x8A
                Exclusive, B2
        Calling Party Number i = 0x0081, '<removed number>'
                Plan:Unknown, Type:Unknown
        Called Party Number i = 0x80, '<removed number>'
                Plan:Unknown, Type:Unknown
003608: Jul  9 09:52:58.899 UTC: ISDN BR0/0/0 Q931: RX <- RELEASE_COMP pd = 8  callref = 0x81
        Cause i = 0x82B9B9A3 - Bearer capability not presently authorized
003609: Jul  9 09:53:52.791 UTC: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0/0, TEI 68 changed to down
003610: Jul  9 09:53:52.791 UTC: ISDN BR0/0/0 Q931: L3_ShutDown: Shutting down ISDN Layer 3
003611: Jul  9 09:53:52.791 UTC: ISDN  **ERROR**: L2_Mail: DLCB is NULL for event 0x211 dest_is 768
003612: Jul  9 09:53:52.843 UTC: %LINK-3-UPDOWN: Interface BRI0/0/0, changed state to down

Thanks,

Tim

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100709/2ca18d2f/attachment.html>