[cisco-voip] CME-to-CME IPSec VPN

[Syed Khalid Ali]

Hi,

This is a pure IPSec VPN. No GRE Tunnels. No Nat. Simple routing and with
VPN.

On Tue, Jul 13, 2010 at 6:14 AM, Peter Casanave <
Peter.Casanave at proactivecommo.com> wrote:

>  Syed,
>
>
>
> Check interesting traffic for your VPN. Make sure the remote network is in
> interesting traffic ACL. Is this a pure IPSec VPN or GRE tunnel with IPSEC?
> Also I don’t know your network, but verify traffic passing over the tunnel
> is not effected by NAT. That is these CME routers are performing NAT.
>
>
>
> *Peter Casanave* | CCVP
> Voice Engineer | Engineering Department
> *Proactive* Communications, Inc.
>
> 3106 S WS Young Dr, Suite A-103
> Killeen, TX 76542
> www.proactivecommo.com
>
> [image: http://www.proactivecommo.com/email/PCI_Logo_email.gif]
>
> DISCLAIMER
> This email message is for the sole use of the intended recipient(s) and may
> contain confidential and privileged information. Any unauthorized review,
> use, disclosure or distribution is prohibited. If you are not the intended
> recipient, please contact the sender by reply email and destroy all copies
> of the original message. Any views expressed in this message are those of
> the individual sender, except where the sender specifically states them to
> be the views of Proactive Communications, Inc.
>
>
>
>
>



-- 
Thanks,
Syed Khalid Ali
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100713/df3c6165/attachment.html>