[cisco-voip] Anyone ever see a T1 with CD, No alarms and be down...?

[Jim Reed]

What does show serial 0/0/0:23 show?  Does it show the line up but the protocol down?  Clocking?  Can't imagine it's anything but ESF and B8ZS.  Assume you have restarted the router.
--
Jim Reed
Manager of Technical Services
Swift Communications, Inc.
970-384-9141 (Direct)
775-772-7666 (Cell)
Sorry, no faxes accepted.
Please send documents by eMail.


On 7/28/10 10:38 AM, "Jonathan Charles" <jonvoip at gmail.com> wrote:

VoiceRtrr#sh controllers t1
T1 0/0/0 is down.
  Applique type is Channelized T1
  Cablelength is short 110
  No alarms detected.
  alarm-trigger is not set
  Soaking time: 3, Clearance time: 10
  AIS State:Clear  LOS State:Clear  LOF State:Clear
  Version info Firmware: 20090408, FPGA: 13, spm_count = 0
  Framing is ESF, Line Code is B8ZS, Clock Source is Line.
  CRC Threshold is 320. Reported from firmware  is 320.
  Data in current interval (283 seconds elapsed):
     2318053 Line Code Violations, 60446 Path Code Violations
     14 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 283 Unavail Secs
  Total Data (last 24 hours)
     682527740 Line Code Violations, 26641064 Path Code Violations,
     4751 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 86400 Unavail Secs
VoiceRtr#

The CD light is lit on the router.

Telco tests clean to the CSU.

I am confused...

Any ideas?

Jonathan



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100728/898417ba/attachment.html>