[cisco-voip] VG224 support CCM 4.1.3 to CUCM 6.1.x

[Wes Sisk]

Use the link under IOS:
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp174059

points to:

http://www.cisco.com/en/US/customer/docs/voice_ip_comm/uc_system/unified/communications/system/versions/IPTMtrix.html#wp1016708

Cisco VG224 (analog voice gateway)

	

15.1(1)T12 
<http://www.cisco.com/en/US/customer/docs/voice_ip_comm/uc_system/unified/communications/system/versions/IPTMtrix.html#wp1041188> 


	

15.0(1)M

	

12.4(24)T1

	

12.4(20)T

	

12.4(15)T3

	

12.4(15)T


/Wes

On Thursday, June 03, 2010 6:05:17 PM, <Johnny.Crothers at datacraft.co.nz> 
wrote:
>
> HI all,
>
>  
>
> I've spent a fair amount of time now looking to see if a current VG224 
> connected to a CUCM 4.1.3 platform will be supported when we upgrade 
> the customer to 6.1.x
>
>  
>
> I've found a compatability guide: 
>  http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp119952
>
>  
>
> Which states for VG224 follow this link: 
> http://www.cisco.com/en/US/partner/products/hw/gatecont/ps2250/tsd_products_support_series_home.html
>
>  
>
> However that link goes to the documentation guides, not the support 
> matrix.
>
>  
>
> I've looked at upgrading the IOS but the gateway only has 64MB RAM 
> therefore only the older deferred software can be used.
>
>  
>
> If anyone knows if this platform is EoL or if its going to work with 
> 6.1.x PLEASE let me know! Its all going around and around in circles :P
>
>  
>
> Below is a show ver
>
>  
>
> Cisco IOS Software, vg224 Software (vg224-I6S-M), Version 12.3(7)T1, 
> RELEASE SOFTWARE (fc2)
>
> Technical Support: http://www.cisco.com/techsupport
>
> Copyright (c) 1986-2004 by Cisco Systems, Inc.
>
> Compiled Thu 22-Apr-04 15:43 by eaarmas
>
>  
>
> ROM: System Bootstrap, Version 12.3(4r)XD, RELEASE SOFTWARE (fc1)
>
>  
>
> hgrnow10 uptime is 16 weeks, 3 days, 4 hours, 19 minutes
>
> System returned to ROM by power-on
>
> System image file is "slot0:vg224-i6s-mz.123-7.T1.bin"
>
>  
>
> Cisco VG224 (R527x) processor (revision 3.0) with 57344K/8192K bytes 
> of memory.
>
> Processor board ID FHK0821U02Q
>
> R527x CPU at 225MHz, Implementation 40, Rev 3.1
>
> 1 On-Board Twenty-Four FXS Analog Voice Module
>
> 2 FastEthernet interfaces
>
> DRAM configuration is 64 bits wide with parity disabled.
>
> 63K bytes of non-volatile configuration memory.
>
> System fpga version is 250025
>
> System readonly fpga version is 240024
>
> Option for system fpga is 'system'.
>
> 31168K bytes of ATA Slot0 CompactFlash (Read/Write)
>
>  
>
> Configuration register is 0x2102
>
>  
>
> Thanks all in advance!
>
>  
>
> Johnny
>
>  
>
>  
>
> *****************************************************************************
> This email and all contents are subject to the following disclaimer:
>
> http://www.datacraft-asia.com/disclaimer
> *****************************************************************************
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100604/7514f3e1/attachment.html>