[cisco-voip] VG224 support CCM 4.1.3 to CUCM 6.1.x

Mon Jun 7 16:34:14 EDT 2010

Awesome, Thanks Wes!

From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Saturday, June 05, 2010 2:36 AM
To: Johnny Crothers at Professional Services at DCNZ-WLG
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] VG224 support CCM 4.1.3 to CUCM 6.1.x

Use the link under IOS:
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/compat/ccmcom
pmatr.html#wp174059

points to:

http://www.cisco.com/en/US/customer/docs/voice_ip_comm/uc_system/unified
/communications/system/versions/IPTMtrix.html#wp1016708

Cisco VG224 (analog voice gateway) 

15.1(1)T12
<http://www.cisco.com/en/US/customer/docs/voice_ip_comm/uc_system/unifie
d/communications/system/versions/IPTMtrix.html#wp1041188>  

15.0(1)M 

12.4(24)T1 

12.4(20)T 

12.4(15)T3 

12.4(15)T 

/Wes

On Thursday, June 03, 2010 6:05:17 PM, <Johnny.Crothers at datacraft.co.nz>
<mailto:Johnny.Crothers at datacraft.co.nz>  wrote:

HI all,

I've spent a fair amount of time now looking to see if a current VG224
connected to a CUCM 4.1.3 platform will be supported when we upgrade the
customer to 6.1.x

I've found a compatability guide:
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/compat/ccmcom
pmatr.html#wp119952
<http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/compat/ccmco
mpmatr.html#wp119952> 

Which states for VG224 follow this link:
http://www.cisco.com/en/US/partner/products/hw/gatecont/ps2250/tsd_produ
cts_support_series_home.html
<http://www.cisco.com/en/US/partner/products/hw/gatecont/ps2250/tsd_prod
ucts_support_series_home.html> 

However that link goes to the documentation guides, not the support
matrix. 

I've looked at upgrading the IOS but the gateway only has 64MB RAM
therefore only the older deferred software can be used.

If anyone knows if this platform is EoL or if its going to work with
6.1.x PLEASE let me know! Its all going around and around in circles :P

Below is a show ver

Cisco IOS Software, vg224 Software (vg224-I6S-M), Version 12.3(7)T1,
RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Compiled Thu 22-Apr-04 15:43 by eaarmas

ROM: System Bootstrap, Version 12.3(4r)XD, RELEASE SOFTWARE (fc1)

hgrnow10 uptime is 16 weeks, 3 days, 4 hours, 19 minutes

System returned to ROM by power-on

System image file is "slot0:vg224-i6s-mz.123-7.T1.bin"

Cisco VG224 (R527x) processor (revision 3.0) with 57344K/8192K bytes of
memory.

Processor board ID FHK0821U02Q

R527x CPU at 225MHz, Implementation 40, Rev 3.1

1 On-Board Twenty-Four FXS Analog Voice Module

2 FastEthernet interfaces

DRAM configuration is 64 bits wide with parity disabled.

63K bytes of non-volatile configuration memory.

System fpga version is 250025

System readonly fpga version is 240024

Option for system fpga is 'system'.

31168K bytes of ATA Slot0 CompactFlash (Read/Write)

Configuration register is 0x2102

Thanks all in advance!

Johnny

************************************************************************
*****
This email and all contents are subject to the following disclaimer:

http://www.datacraft-asia.com/disclaimer
************************************************************************
*****

________________________________

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

*****************************************************************************
This email and all contents are subject to the following disclaimer:

http://www.datacraft-asia.com/disclaimer
*****************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100608/800a290a/attachment.html>