[cisco-voip] Translation Pattern

[Dennis Heim]

LDAP should have the phone number field and the ip-phone field. I would populate one of them with the 4 digit field. Unrelated to that I'd get off of CUCM 5.x as soon as I could.

Dennis Heim
Network Voice Engineer
CDW  Advanced Technology Services
11711 N. Meridian Street, Suite 225
Carmel, IN  46032

317.569.4255 Office
317.569.4201 Fax
317.694.6070 Cell
dennis.heim at cdw.com<mailto:dennis.heim at cdw.com>
cdw.com/content/solutions/unified-communications/<http://www.cdw.com/content/solutions/unified-communications/>


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of SA
Sent: Tuesday, June 08, 2010 6:26 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Translation Pattern

Hi,

I have cisco Call Manager 5.1 which I have just synced with the LDAP (Micorosft AD)
Problem is my internal DN are only four digits which I am configuring in the CCM.

But inside the LDAP the users have total 9 digits including my ISDN number also.
For example 12345XXXX. I want call manager to discard the first 5 digits and dial
only the last four digits of the dialed number.

any idea how can i do this. I tried to play with the Translation pattern but its not working
with me.

Thank you.
Regards,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100608/ee2d45b8/attachment.html>