[cisco-voip] CM 8 custom LDAP filter

[Nick]

Hi Kevin

I have had a play around with these try either one of the following

Filter by Telephone Number field

(&(objectclass=user)(!(objectclass=Computer))(!(UserAccountControl:1.2.840.113556.1.4.8043:=2))(telephonenumber=*))

or

(&(objectclass=user)(telephonenumber=*))
either of these should work

Regards

Nick
On 9 June 2010 14:43, Kevin Damisch <kevin.damisch at vitalsite.com> wrote:

>  Has anyone used custom LDAP filters yet?  I am trying to create a filter
> so that it only imports users with a value populated in the telephoneNumber
> field in AD.  If this field is blank, don’t sync the user over.  Not sure on
> what string to enter on the custom filter page.
>
> ------------------------------
> This communication (including any attachments) is intended only for the use
> of the individual or entity to which it is addressed, and may contain
> information that is privileged, confidential and exempt from disclosure
> under applicable law. If you are not the intended recipient, any
> dissemination, distribution or copying of this communication is strictly
> prohibited. If you have received this communication in error, please notify
> Vital Support Systems at 515 334 5700 and delete or destroy all copies and
> the original document.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100609/c4d07497/attachment.html>