[cisco-voip] Upgrading a 7925g firmware

[cips]

You will require a stop/start of the TFTP Service for the 792x to pickup the
new load.

Restarting the TFTP is not (really) service affecting.

Every phone that is connected/powered-up will contact the TFTP, so when the
service is restarting the booting of phone might take a minute longer.

This is the only affect it will have as far as I know.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike King
Sent: donderdag 17 juni 2010 13:58
To: Cisco VoIPoE List
Subject: Re: [cisco-voip] Upgrading a 7925g firmware

Is a TFTP restart service affecting?

(again, I think the answer is no, but I'd rather not find out the hard
way that it is)

On Wed, Jun 16, 2010 at 11:10 PM, Go0se <me at go0se.com> wrote:
> Phone firmware loads do not require a full reboot. I do believe, however,
> that you will need to stop/start TFTP services on both boxes after you
have
> applied the update.
>
> Thanks,
>
> Go0se
>
> My blog:
> http://atc.go0se.com
>
> -------------------------------------
> Help Hopegivers International
> feed the orphans of India.
> http://www.hopegivers.org
> -------------------------------------
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike King
> Sent: Wednesday, June 16, 2010 9:42 PM
> To: Cisco VoIPoE List
> Subject: [cisco-voip] Upgrading a 7925g firmware
>
> Callmanager 7.1.3
>
> I hwant to upgrade to the 1.3.4 SR1 release on the 7925G.  I currently
> have a few phones defined. (We're having large problems with them
> dropping all audio for about 5-15 seconds, and looks like this might
> have a fix for it)
>
> So I get the cmterm-7925-sccp.1-3-4SR1.cop.sgn file off Cisco.  In the
> release notes is this little gem:
> To make the Cisco Unified Wireless IP Phone available in the Cisco
> Unified Communications Manager system, you might need to upgrade your
> system with the latest DevPack patch for your release of Cisco Unified
> Communications Manager. Check the Readme file
> (cmterm-7925-sccp.1-3-4SR1-Readme.html or
> cmterm-7921-sccp.1-3-4SR1-Readme.html) that is posted with the
> firmware version 1.3(4)SR1 for more information.
>
> I can't find that file. (The readme file)
>
> Any ways...
>
> If goto OS administration -> Software Upgrades -> Install / Upgrade,
> and upload the .cop.sgn file
>
> Will I have to reboot the PUB / SUB?  (I'm assuming not, since I'm not
> adding a new phone type)
>
> Mike
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip