[cisco-voip] upgrade phone firmware

[Ed Leatherman]

You can see an active loadID by doing a device search in RTMT (at
least in CUCM 7.1.5, never tried in previous versions). This probably
isn't optimal for a large number of phones though. Would be nice if
you could export results to CSV or something.

Hmm even with that looks like i'm only getting activeload for the java
based phones.. 40/60's don't seem to report it.

Unfortunately BAT looks like it only tells you if there is a
non-default load configured for the phone in the database, not
actually what the phone is running.




On Thu, Jun 17, 2010 at 10:57 AM, Scott Voll <svoll.voip at gmail.com> wrote:
> Puckers--
> There has been some talks about upgrading firmware before upgrades.  This is
> what I have done in the past.  But my question is, in the past it was
> suggested to only upgrade ~50 phones at a time.  Does this change in newer
> versions of CM?  or is ~50 at a time still the best way to roll out firmware
> on the phones?
> follow up question: is there a way to see what phones are on what firmware
> versions?
> Thanks
> Scott
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>



-- 
Ed Leatherman