[cisco-voip] sending calls form a voip dialpeer to another dialpeer

[Dew Swen]

Yes Kapil, I am playing a prompt and that forward call to Unity. I play 
the prompt in g711 as you said.

Do I need to send call to CUCM (Unity's hunt pilot number) in a g729 
format? Unity talks g729. If it is like that I need xcoder.

What about MTP?

Regards,

-- 
Dew Swen
CCVP, CCNP



23.06.2010 11:02, kapil atrish yazmış:
>
> Are you playing any prompts via TCL,  it supports only G.711 for voice 
> prompts. Depending upon requirements you may need Xcoder on GW to get 
> it working.
>
> --- On *Wed, 6/23/10, Dew Swen /<dew.swen at gmail.com>/* wrote:
>
>
>     From: Dew Swen <dew.swen at gmail.com>
>     Subject: Re: [cisco-voip] sending calls form a voip dialpeer to
>     another dialpeer
>     To: "Mac GroupStudy" <mac.groupstudy at gmail.com>
>     Cc: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
>     Date: Wednesday, June 23, 2010, 12:34 PM
>
>     Hi Mac,
>
>     Yes this command works for my 2821 router.
>
>     I need to send call to Unity with a tcl script. I got the call
>     from CUCM (by using a translation pattern) with a voip dial-peer;
>     after that I need to send this call to Unity with a voip
>     dial-peer. That's why I need 2 voip dialpeer.
>
>     The main question is this?
>
>     "What else I need? MTP? Or any other tricks that I must do?"
>
>     Waiting for your suggestions.
>
>     Regards,
>
>     -- 
>     Dew Swen
>     CCVP, CCNP
>
>
>
>     23.06.2010 01:35, Mac GroupStudy yazmış:
>>     If your router supports the command you don't even need a CUBE.
>>     Try the command I referenced to see if it is supported first.
>>     Also consider why you need to route from one VOIP DP to another.
>>     A true CUBE solution maybe your best bet.
>>
>>     On Tue, Jun 22, 2010 at 4:02 PM, Dew Swen <dew.swen at gmail.com
>>     <http://us.mc550.mail.yahoo.com/mc/compose?to=dew.swen@gmail.com>> wrote:
>>
>>         Other than cube what is needed?
>>
>>         Regards,
>>
>>         --
>>         Dew Swen
>>         CCVP, CCNP
>>
>>
>>
>>
>>         On 22.Haz.2010, at 16:32, Mac GroupStudy
>>         <mac.groupstudy at gmail.com
>>         <http://us.mc550.mail.yahoo.com/mc/compose?to=mac.groupstudy@gmail.com>>
>>         wrote:
>>
>>>         Prior to CUBE there was a concept of an IP-IP Gateway. It
>>>         and CUBE requires something similar to this:
>>>         config)# voice service voip
>>>         # allow-connections h323 to h323
>>>
>>>
>>>         On Tue, Jun 22, 2010 at 8:41 AM, Dew Swen
>>>         <dew.swen at gmail.com
>>>         <http://us.mc550.mail.yahoo.com/mc/compose?to=dew.swen@gmail.com>>
>>>         wrote:
>>>
>>>             Could anyone shed on some light about:
>>>
>>>             "What is needed for sending calls from a voip dial-peer
>>>             to voip dial-peer in a h323 gw?"
>>>
>>>             AFAIK,
>>>             - CUBE functions must be enabled
>>>             - MTP must be configured on both CUCM and IOS
>>>             - Have to do something in CUCM Gateway configuration??
>>>
>>>             Any help or document will be appriciated.
>>>
>>>             Kind regards,
>>>
>>>             -- 
>>>             Dew Swen
>>>             CCVP, CCNP
>>>
>>>
>>>             _______________________________________________
>>>             cisco-voip mailing list
>>>             cisco-voip at puck.nether.net
>>>             <http://us.mc550.mail.yahoo.com/mc/compose?to=cisco-voip@puck.nether.net>
>>>             https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>
>
>     -----Inline Attachment Follows-----
>
>     _______________________________________________
>     cisco-voip mailing list
>     cisco-voip at puck.nether.net
>     <http://us.mc550.mail.yahoo.com/mc/compose?to=cisco-voip@puck.nether.net>
>     https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100623/36ba1209/attachment.html>