[cisco-voip] B-ACD with CME-as-SRST 8x

[Jason Aarons (US)]

Running UCCX with a Remote Site that has local PRI. During a WAN outage I want to provide some sort of basic queuing.  So I am wondering if B-ACD is supported with CME-as-SRST? I only see references to SRST not CME-as-SRST, or should I just do some simple ephone-hunt out of .aef in CUE 8.0.1?

Using IOS 15.0(1)XA3 which has telephony-service version 8.0, cme-bacd-3.0.0.2.tar, and also have a NME-CUE running 8.0.1 in same router.

Anyone have some hands on experience and vouches this works for the newer 8x software versions listed? Most B-ACD info I find is from CME 3x/4x days.



Configuring B-ACD

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bacd/configuration/guide/40bacd.html#wp1003335




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100624/77199af6/attachment.html>