[cisco-voip] HA With UCCX

[James Buchanan]

"This article defines the Cisco Unified Communications requirements for ESXi on UCS B200 blade servers, CPU E5540 and higher."

>From the very top of the page :-)

James Buchanan | Senior Network Engineer | South Region | Presidio Networked Solutions 
12 Cadillac Dr, Suite 130, Brentwood, TN 37027 | jbuchanan at presidio.com
D: 615-866-5729 | F: 615-866-5781 | www.presidio.com <http://www.presidio.com> 
CCIE #25863, Voice



-----Original Message-----
From: Tanner Ezell [mailto:tanner.ezell at gmail.com] 
Sent: Tuesday, June 29, 2010 10:03 AM
To: Bill
Cc: James Buchanan; H, Tim; cisco-voip
Subject: Re: [cisco-voip] HA With UCCX

According to the following page, you can run it on a VMware supported
configuration for VMware ESXi 4.0

http://docwiki.cisco.com/wiki/Unified_Communications_VMWare_Requirements

"VMware ESXi 4.0 must be deployed in a configuration supported by
VMware. VMware provides comprehensive compatibility guides on its
website for systems (servers), I/O devices, and storage and
storage-area networks."

On Tue, Jun 29, 2010 at 11:00 AM, Bill <bill at hitechconnection.net> wrote:
> Of course it does. :) They are going to relax a lot of the requirements
> around VMware soon but I don't think that is going to be one of them.
>
>
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Buchanan
> Sent: Tuesday, June 29, 2010 9:54 AM
> To: H, Tim; Tanner Ezell
> Cc: cisco-voip
> Subject: Re: [cisco-voip] HA With UCCX
>
> Does UCCX also have the requirement to use Cisco UCS as the server
> platform? I thought it did but may be wrong.
>
> James Buchanan | Senior Network Engineer | South Region | Presidio
> Networked Solutions
> 12 Cadillac Dr, Suite 130, Brentwood, TN 37027 | jbuchanan at presidio.com
> D: 615-866-5729 | F: 615-866-5781 | www.presidio.com
> <http://www.presidio.com>
> CCIE #25863, Voice
>
>
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of H, Tim
> Sent: Tuesday, June 29, 2010 9:40 AM
> To: Tanner Ezell
> Cc: cisco-voip
> Subject: Re: [cisco-voip] HA With UCCX
>
> Thanks Tanner.  Do you know what the max latency is for version 8.x is
> between machines?
>
> Tim
>
>
> -----Original Message-----
> From: Tanner Ezell [mailto:tanner.ezell at gmail.com]
> Sent: Tuesday, June 29, 2010 10:38 AM
> To: H, Tim
> Cc: cisco-voip
> Subject: Re: [cisco-voip] HA With UCCX
>
> HA is only available over the WAN on version 8.x (same for
> virtualization). If running 7.x or below you'll have to have them
> located on the same LAN.
>
> On Tue, Jun 29, 2010 at 10:34 AM, H, Tim <TimH at trstone.com> wrote:
>> Does these servers have to be in the same physical location, if not,
> what's
>> the max latency allowed between them?
>>
>>
>>
>> What is the minimum version allowed for them to be virtual?
>>
>>
>>
>> Thanks,
>>
>>
>>
>> Tim
>>
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
>
>
> --
> Cheers,
>
> Tanner Ezell
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>



-- 
Cheers,

Tanner Ezell