[cisco-voip] 回复： Re: Problem using IP Communicator under Vista

[jackycxh at gmail.com]

At first, ensure you undocked the laptop when you're installing IPC. 
and you may want to try to configure the IPC with an asigned name, instead of using the name automaticed generated by MAC. 
___
Sent with SnapperMail
www.snappermail.com

 ..... Original Message .......
在 Tue, 5 Aug 2008 08:42:30 +0100 "Granger, Simon" <simon.granger at fmglobal.com> 中写到：
>This is not a Vista thing, this is an issue in communicator and the way
>it works
>
> 
>
>You are fighting a loosing battle trying to get this to work, we have
>Dell's here and had exactly the same issues.
>
> 
>
>We have to change the registry every time a Nic changes it's IP and then
>communicator will Launch, We went through Cisco Tac with this.
>
> 
>
>Good luck!
>
> 
>
> 
>
>From: cisco-voip-bounces at puck.nether.net
>[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan
>Charles
>Sent: 04 August 2008 22:56
>To: ROZA, Ariel
>Cc: cisco-voip at puck.nether.net
>Subject: Re: [cisco-voip] Problem using IP Communicator under Vista
>
> 
>
>I am running CIPC 2.1.3 on both 64-bit and 32-bit Vista with no problems
>
>
>
>Jonathan
>
>On Mon, Aug 4, 2008 at 4:01 PM, ROZA, Ariel
><Ariel.ROZA at la.logicalis.com> wrote:
>
>My customer is running IPC 2.1.3 now, and still has the issues.
>
>It seems related to the notebook/docking sation model, as now they have
>another brand of notebooks (Dells) and those do not have issues.
>
>The affected notebooks are HP NC6400, with docking stations HP EN488AA.
>Those notebooks do not have an "undock" function under Vista, and the
>users just push a lever to undock the computer.
>
>Has anyone ran into something similar?
>
>Greetings,
>
>Ariel
>
>
>-----Original Message-----