[cisco-voip] Manipulating MWI by XML

[dev]

 Hi Bill,

Have you had an success with this. I need to accomplish the same task and
can't find out how to yet either.

Thanks

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bill Simon
Sent: Friday, February 26, 2010 10:03 PM
To: Cisco Voip
Subject: [cisco-voip] Manipulating MWI by XML

Does anybody know how to manipulate the MWI on a phone through an XML
command to the phone itself?  For example, instruct it to turn on, off, or
blink.  Sending an instruction to the phone to dial the MWI toggle code
configured in Call Manager is not suitable in this case.

Thanks
Bill
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip