[cisco-voip] create automatic disconnected

[Matthew Saskin]

Arnold -

Your only option is a service parameter for the maximum call length, which
will disconnect calls after a certain period of time.  It's not granular, so
it's an all or nothing setting.  I believe the default is either 8 or 12
hours, but is configurable in number of minutes.

Matthew Saskin
msaskin at gmail.com
203-253-9571

July 18, 2010 - 1500m swim (in the hudson), 40k bike, 10k run
Please support the Leukemia & Lyphoma Society
http://pages.teamintraining.org/nyc/nyctri10/msaskin


On Wed, Mar 3, 2010 at 10:22 PM, Arnold Lesar <arnoldlesar at yahoo.co.uk>wrote:

>  Dear all,
>
> how to create automatic disconnect in ccm 4.0?
> for example :
> the user can call for only 15 minutes after that the phone disconnected.
>
> Regards,
>
> Arnold Samuel Lesar
>
>
> ------------------------------------------------------
> Note: This message was created by ARNOLD SAMUEL LESAR.
> ------------------------------------------------------
>
>
> --------------------------------------------------------------------------
> --------------------------------------------------------------------------
> PT. PELITA RELIANCE INTERNATIONAL
> Eka Hospital BSD City, Tangerang
> Address : CBD Lot IX, BSD City, Tangerang
> Phone : (+62-21) 256 555 55
> Fax : (+62-21) 256 555 44
> --------------------------------------------------------------------------
> --------------------------------------------------------------------------
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100304/357b7c70/attachment.html>