[cisco-voip] Busy on CUE Pilot Numbers

[Billy Seale]

When I dial the pilot numbers of either AA or Voicemail I get a slow busy signal.  My configuration is below.
 
voice service voip
 allow-connections h323 to sip
 allow-connections sip to h323
 allow-connections sip to sip
 no supplementary-service h450.2
 no supplementary-service h450.3
 fax protocol cisco
 h323
  call start slow
 
 

interface Integrated-Service-Engine1/0
 ip address 10.10.10.2 255.255.255.0
 service-module ip address 10.10.10.10 255.255.255.0
 !Application: CUE Running on NME
 service-module ip default-gateway 10.10.10.2
 no keepalive
 
dial-peer voice 6000 voip
 destination-pattern 69..
 session protocol sipv2
 session target ipv4:10.10.10.10
 dtmf-relay sip-notify
 codec g711ulaw
 no vad
 
 
 
A debug ccsip shows this output when a call is made to either number.
 
Mar  4 20:08:31.929: //54139/89A93F0DB94C/SIP/Error/sipSPI_ipip_set_history_info_header: Not SIP2SIP modeSIP: (54139) Group (a= group line) attribute, level 65535 instance 1 not found.
 
Any ideas on what this issue would be?