[cisco-voip] Call Reject not working on voice port...

Mathew Miller miller.mathew at gmail.com
Thu Mar 4 20:04:00 EST 2010


Try this.


voice-port 0/0/0:23
 call-block translation-profile incoming BLOCKED

On Mar 4, 2010, at 5:20 PM, Jonathan Charles wrote:

> So, I have the following translation:
> 
> voice translation-rule 2
>  rule 1 reject /^6305551212$/
> 
> voice translation-profile BLOCKED
>  translate calling 2
> !
> 
> 
> voice-port 0/0/0:23
>  translation-profile incoming BLOCKED
>  bearer-cap Speech
> !
> 
> Router#test voice translation-rule 2 6305551212
> 6305551212 blocked on rule 1
> 
> 
> Mar  4 17:17:48: //-1/xxxxxxxxxxxx/RXRULE/regxrule_match: Skipping a call block rule; number=6305551212rule precedence=1
> .Mar  4 17:17:48: //-1/xxxxxxxxxxxx/RXRULE/regxrule_match: more digits needed; number=6305551212 rule precedence=2
> .Mar  4 17:17:48: //-1/xxxxxxxxxxxx/RXRULE/regxrule_match: No match; number=6305551212 rule precedence=3
> .Mar  4 17:17:48: //-1/xxxxxxxxxxxx/RXRULE/regxrule_rule_match: partial match found, partial_match 2
> .Mar  4 17:17:48: //-1/xxxxxxxxxxxx/RXRULE/regxrule_profile_match_internal: partial match found with rule 2 ruleset 2
> .Mar  4 17:17:48: //-1/xxxxxxxxxxxx/RXRULE/regxrule_profile_subst_internal: partial match found doing regxrule_profile_match
> 
> And the call progresses fine to its destination.
> 
> It appears the call reject via translation doesn't do anything, the very first line of the debug says it is just skipping the rule...
> 
> What is going on here?
> 
> Why does this not work...
> 
> This is a 2851 running 12.4.24T2
> 
> 
> Jonathan
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip




More information about the cisco-voip mailing list