[cisco-voip] Call Reject not working on voice port...

[Jonathan Charles]

OK, now I am starting to wonder if it was working the whole time...

The calls are being rejected, but they are still ringing on the calling
side...

Thanks!


On Thu, Mar 4, 2010 at 11:36 PM, Jonathan Charles <jonvoip at gmail.com> wrote:

> Did it on the inbound peers and moved it off the voice port....
>
> Call is not blocked... and translation isn't invoked.
>
>
> !
> dial-peer voice 100 pots
>
>  call-block translation-profile incoming BLOCKED
>  call-block disconnect-cause incoming call-reject
>  incoming called-number .
>  direct-inward-dial
>
>  port 0/0/0:23
> !
> dial-peer voice 101 pots
>
>  call-block translation-profile incoming BLOCKED
>  call-block disconnect-cause incoming call-reject
>  incoming called-number .
>  direct-inward-dial
>  port 0/0/1:23
>
>
> However, if I test it...
>
> HTACHI525a#test voice translation-rule 2 6305551212
> 6302192766 blocked on rule 1
> HTACHI525a#
> .Mar  4 23:28:15: //-1/xxxxxxxxxxxx/RXRULE/regxrule_match: Skipping a call
> block rule; number=6305551212 rule precedence=1
> .Mar  4 23:28:15: //-1/xxxxxxxxxxxx/RXRULE/regxrule_match: more digits
> needed; number=6305551212 rule precedence=2
> .Mar  4 23:28:15: //-1/xxxxxxxxxxxx/RXRULE/regxrule_match: No match;
> number=6305551212 rule precedence=3
> .Mar  4 23:28:15: //-1/xxxxxxxxxxxx/RXRULE/regxrule_rule_match: partial
> match found, partial_match 2
> .Mar  4 23:28:15: //-1/xxxxxxxxxxxx/RXRULE/regxrule_match: Matched a call
> block rule; number=6305551212 rule precedence=1
> HTACHI525a#
>
>
> On an actual call, you see no debug output.
>
>
> Jonathan
>
>
>
>
> On Thu, Mar 4, 2010 at 11:24 PM, Jonathan Charles <jonvoip at gmail.com>wrote:
>
>> Not valid on the voice port.
>>
>>
>> On Thu, Mar 4, 2010 at 7:04 PM, Mathew Miller <miller.mathew at gmail.com>wrote:
>>
>>> Try this.
>>>
>>>
>>> voice-port 0/0/0:23
>>>  call-block translation-profile incoming BLOCKED
>>>
>>> On Mar 4, 2010, at 5:20 PM, Jonathan Charles wrote:
>>>
>>> > So, I have the following translation:
>>> >
>>> > voice translation-rule 2
>>> >  rule 1 reject /^6305551212$/
>>> >
>>> > voice translation-profile BLOCKED
>>> >  translate calling 2
>>> > !
>>> >
>>> >
>>> > voice-port 0/0/0:23
>>> >  translation-profile incoming BLOCKED
>>> >  bearer-cap Speech
>>> > !
>>> >
>>> > Router#test voice translation-rule 2 6305551212
>>> > 6305551212 blocked on rule 1
>>> >
>>> >
>>> > Mar  4 17:17:48: //-1/xxxxxxxxxxxx/RXRULE/regxrule_match: Skipping a
>>> call block rule; number=6305551212rule precedence=1
>>> > .Mar  4 17:17:48: //-1/xxxxxxxxxxxx/RXRULE/regxrule_match: more digits
>>> needed; number=6305551212 rule precedence=2
>>> > .Mar  4 17:17:48: //-1/xxxxxxxxxxxx/RXRULE/regxrule_match: No match;
>>> number=6305551212 rule precedence=3
>>> > .Mar  4 17:17:48: //-1/xxxxxxxxxxxx/RXRULE/regxrule_rule_match: partial
>>> match found, partial_match 2
>>> > .Mar  4 17:17:48:
>>> //-1/xxxxxxxxxxxx/RXRULE/regxrule_profile_match_internal: partial match
>>> found with rule 2 ruleset 2
>>> > .Mar  4 17:17:48:
>>> //-1/xxxxxxxxxxxx/RXRULE/regxrule_profile_subst_internal: partial match
>>> found doing regxrule_profile_match
>>> >
>>> > And the call progresses fine to its destination.
>>> >
>>> > It appears the call reject via translation doesn't do anything, the
>>> very first line of the debug says it is just skipping the rule...
>>> >
>>> > What is going on here?
>>> >
>>> > Why does this not work...
>>> >
>>> > This is a 2851 running 12.4.24T2
>>> >
>>> >
>>> > Jonathan
>>> >
>>> >
>>> >
>>> > _______________________________________________
>>> > cisco-voip mailing list
>>> > cisco-voip at puck.nether.net
>>> > https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100304/4eeaa668/attachment.html>