[cisco-voip] Busy on CUE Pilot Numbers

[Billy Seale]

That was exactly the problem and yes it is CUE 7.1.
 
Thanks for your help.

________________________________

From: Craig Staffin [mailto:cmstaffin at gmail.com]
Sent: Thu 3/4/2010 9:28 PM
To: Billy Seale
Cc: <cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] Busy on CUE Pilot Numbers



Check licensing.

Show license application

You are missing the port licenses. I am guessing CUE 7.1

Craig Staffin
Lead voice consulting engineer - CCNA, CCVP, CCIE# 25802 (Voice)
Core BTS
+1 262 754 2634
craig.staffin at corebts.com

On Mar 4, 2010, at 2:24 PM, "Billy Seale" <billys at dakota2k.com> wrote:

> When I dial the pilot numbers of either AA or Voicemail I get a slow 
> busy signal.  My configuration is below.
>
> voice service voip
> allow-connections h323 to sip
> allow-connections sip to h323
> allow-connections sip to sip
> no supplementary-service h450.2
> no supplementary-service h450.3
> fax protocol cisco
> h323
>  call start slow
>
>
>
> interface Integrated-Service-Engine1/0
> ip address 10.10.10.2 255.255.255.0
> service-module ip address 10.10.10.10 255.255.255.0
> !Application: CUE Running on NME
> service-module ip default-gateway 10.10.10.2
> no keepalive
>
> dial-peer voice 6000 voip
> destination-pattern 69..
> session protocol sipv2
> session target ipv4:10.10.10.10
> dtmf-relay sip-notify
> codec g711ulaw
> no vad
>
>
>
> A debug ccsip shows this output when a call is made to either number.
>
> Mar  4 20:08:31.929: //54139/89A93F0DB94C/SIP/Error/
> sipSPI_ipip_set_history_info_header: Not SIP2SIP modeSIP: (54139) 
> Group (a= group line) attribute, level 65535 instance 1 not found.
>
> Any ideas on what this issue would be?
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip