[cisco-voip] H.323 Gateway (Cisco) and Plan Type

[Matthew Ballard]

I ran into a problem with our telephony provider that has been discovered as
of yesterday.  Our system is sending out a Type of International (see below)
when it is connecting a call that begins with 011.  After opening a ticket
with our provider when trying to call international (at least some of the
time), there is a problem with sending the 011 and sending the type
international.  I'm not sure in IOS how to either strip the 011 or change
the Type being sent (someone else did the initial setup of the gateway).
Can someone point me in the right direction?

Thank You,
Matthew Ballard
Network Manager
Otis College of Art and Design
mballard at otis.edu

.Mar 10 14:15:11.540 PST: ISDN Se0/0/0:23 Q931: pak_private_number: Invalid
type/plan 0x0 0x0 may be overriden; sw-type 13
.Mar 10 14:15:11.540 PST: ISDN Se0/0/0:23 Q931: pak_private_number: Invalid
type/plan 0x0 0x0 may be overriden; sw-type 13
.Mar 10 14:15:11.540 PST: ISDN Se0/0/0:23 Q931: Applying typeplan for
sw-type 0xD is 0x1 0x1, Called num 011442075147212
.Mar 10 14:15:11.544 PST: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8  callref
= 0x6D92 
        Bearer Capability i = 0x8090A2
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA98397
                Exclusive, Channel 23
        Calling Party Number i = 0x2181, '3106656929'
                Plan:ISDN, Type:National
        Called Party Number i = 0x91, '011442075147212'
                Plan:ISDN, Type:International