[cisco-voip] Quest for the best H.323 dial-peer configuration

[Carter, Bill]

I get confused with "incoming called-number" Should it be "incoming
called-number ." or ""incoming called-number .T"

Not getting any action here so how about this:

dial-peer voice 1 pots
 incoming called-number .
 direct-inward-dial
 port 0/0/0:23
!
dial-peer voice 10 voip
 preference 1
 destination-pattern [1-79]...
 session target ipv4:X.X.X.X
 incoming called-number .
 voice-class codec 1
 voice-class h323 1
 dtmf-relay h245-alphanumeric
 fax-relay ecm disable
 fax-relay sg3-to-g3
 fax rate disable
 no vad
!
dial-peer voice 100 pots
 destination-pattern 9[2-9]......
 direct-inward-dial
 port 0/0/0:23
!
dial-peer voice 101 pots
 destination-pattern 91[2-9]..[2-9]......
 direct-inward-dial
 port 0/0/0:23
 prefix 1
!
dial-peer voice 102 pots
 destination-pattern 9911
 direct-inward-dial
 port 0/0/0:23
 prefix 911
!

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Carter, Bill
Sent: Thursday, March 11, 2010 7:37 PM
To: Cisco-Voip-Puck
Subject: [cisco-voip] Quest for the best H.323 dial-peer configuration

I want to put together the worlds best H.323 dial-peer configuration  
template. Here are the guidelines.

- US dial plan
- telco sends 4-digits
- all ip phone DNs begin with [0-8]...
- all ip phones dial 9 then the pstn number
- don't use 9T
- pstn connection is a Pri on voice-port 0/0/0:23
- fxs port 0/1/0 with did ending in 1000
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip