[cisco-voip] 4.1(3) DMA and PAK license questions

[Matthew Linsemier]

Thanks all... It was a lot less painless than I thought.

Matt


On 3/14/10 8:49 PM, "Kin Wai" <kinwai at singnet.com.sg> wrote:

> It¹s possible. However, you must complete the DMA process.
> After that, you will need to retrieve the license file ,somewhere in the DMA
> folder I remember correctly.
>  
>  
> After that, go to
> https://tools.cisco.com/SWIFT/Licensing/LicenseAdminServlet/displayUpgradeable
> Products?FormId=806&SubGroup=CCMUPGFEAT
>  
> Fill in the form, it will auto issue you with the new license file.
>  
> Cheers,
> Kin Wai
>  
> 
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
> Sent: Monday, March 15, 2010 12:46 AM
> To: Matthew Linsemier
> Cc: Cisco VoIPoE List
> Subject: Re: [cisco-voip] 4.1(3) DMA and PAK license questions
>  
> 
> As far as I know, this is possible. The data import process (installing with
> the DMA file) and the license loading are two separate procedures. If you are
> starting from scratch, i.e. not importing the DMA file, all you need to do is
> load the license pack you get from Cisco after uploading the license file you
> get with your DMA.
> 
> The upgrading from 4.1(x) to 7.1(x) document explains this fairly well.
> Although I had to read through it a few times.
> 
> 
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                              - LFJ (with apologies to Mr. Popeil)
> 
> 
> ----- Original Message -----
> From: "Matthew Linsemier" <mlinsemier at apassurance.com>
> To: "Cisco VoIPoE List" <cisco-voip at puck.nether.net>
> Sent: Sunday, March 14, 2010 11:14:12 AM GMT -05:00 US/Canada Eastern
> Subject: [cisco-voip] 4.1(3) DMA and PAK license questions
> 
> All,
> 
> I am currently performing an upgrade from CCM 4.1(3) to UCM 7.1(3b), but am
> performing a clean install of 7.1(3b).  Is there a way to run DMA on 4.1(3)
> and extract the files that Cisco licensing needs to generate my new 7.1(3b)
> licenses without actually completing the upgrade.  I¹ve already built the new
> server, configured it, and only need the licenses.
> 
> I have contacted Cisco licensing and provided them with the original sales
> order, but for whatever reason the 7960 phones are not on the order.   Of
> course this was 5 years ago, and AT&T placed the original orders for
> equipment, so I¹m not sure if their was a second sales order number or not
> (our Cisco support team is looking into this).  Cisco licensing says that I
> should just put in the PAK, but I didn¹t think that the included PAK keys in
> our Software upgrade kits (7.0 and 7.1) received through UCSS would have all
> of the phone licensing included, and that I would need to get this from DMA.
> 
> Can anyone comment?
> 
> Thanks,
> 
> Matt 
> 
> 
> CONFIDENTIALITY STATEMENT
> This communication and any attachments are CONFIDENTIAL and may be protected
> by one or more legal privileges. It is intended solely for the use of the
> addressee identified above. If you are not the intended recipient, any use,
> disclosure, copying or distribution of this communication is UNAUTHORIZED.
> Neither this information block, the typed name of the sender, nor anything
> else in this message is intended to constitute an electronic signature unless
> a specific statement to the contrary is included in this message. If you have
> received this communication in error, please immediately contact me and delete
> this communication from your computer. Thank you.
> 
> 
> 
> _______________________________________________ cisco-voip mailing list
> cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
> 


CONFIDENTIALITY STATEMENT
This communication and any attachments are CONFIDENTIAL and may
be protected by one or more legal privileges. It is intended
solely for the use of the addressee identified above. If you
are not the intended recipient, any use, disclosure, copying
or distribution of this communication is UNAUTHORIZED. Neither
this information block, the typed name of the sender, nor
anything else in this message is intended to constitute an
electronic signature unless a specific statement to the
contrary is included in this message. If you have received this
communication in error, please immediately contact me and delete
this communication from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100315/d78990e7/attachment.html>