[cisco-voip] Mixing PVDM types in a 2811

[Jason Aarons (US)]

Been so long ago since I saw a NM-HDV I can't remember....maybe 2004 in a 2600? I think the answer is yes but not positive.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mark Holloway
Sent: Tuesday, March 16, 2010 11:23 AM
To: cisco-voip voyp list
Subject: [cisco-voip] Mixing PVDM types in a 2811

Is it possible to populate a 2811 with PVDM2 modules as well as an NM-HDV with PVDM-12 modules and utilize both sets of DSP's?  For example, configure all the PVDM2's for transcoding and the PVDM-12's for conferencing.  

Thanks,
Mark




_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer: 

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.