[cisco-voip] ccmuser password and PIN migrate from Ver 4.1 to 7.1

[Manoj Kalpage]

Thanks Ryan,

This means, As DMA tool doesn't migrate AD password information. If I want
to have existing password, only solution is to continue using current AD
server???

So, I don't have much choice except setup one intitial password for all
ccmusers and send it to all employee DL but our security  folks don't like
it.
I don't think it is practical to create 4,000 different initial passwords
for each users and send them seperatley by using 4,000 e-mails.



On Mon, Mar 15, 2010 at 11:58 PM, Ryan Ratliff <rratliff at cisco.com> wrote:

> It is pretty trivial in CUCM 7 to disable the ldap authentication.  The big
> issue for your uses will be the lack of password sync from AD to CUCM so
> when you disable ldap auth their old passwords will not work.
>
>  -Ryan
>
>  On Mar 15, 2010, at 10:53 AM, Manoj Kalpage wrote:
>
> Adam,
> George,
>
> Thank you for the reply. We have dedicated Exchange+AD server for CUCM
> cluster and Unity but as we moving to Unity connection 7.1 we will
> decommissioning our AD server. is there any way I can temporary use AD for
> LDAP authentication and decommission it later?
>
> Regards,
> MK
>
>  On Mon, Mar 15, 2010 at 11:34 PM, <george.hendrix at l-3com.com> wrote:
>
>>   I’m pretty sure you will also have to sever the AD integration on the
>> 4.1 cluster prior to migration.
>>
>>
>> As Adam said, the User PIN and password at set the same for each user
>> during CUCM 7.1 installation.  The link below covers post installation tasks
>> regarding active directory integration.
>>
>>
>>
>> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/upgrade/7_1_2/upgrd712.html
>>
>>
>>
>> Bill Hendrix
>>
>> <image001.jpg>
>>
>> george.hendrix at l-3com.com
>>
>> W: 813-281-3109  C: 813-205-0979
>>
>> STRATIS Service Desk: 1-800-871-9983
>>
>>
>> *From:* cisco-voip-bounces at puck.nether.net [mailto:
>> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Adam Frankel
>> *Sent:* Monday, March 15, 2010 10:06 AM
>> *To:* Manoj Kalpage
>> *Cc:* Cisco Voip
>> *Subject:* Re: [cisco-voip] ccmuser password and PIN migrate from Ver 4.1
>> to 7.1
>>
>>
>> In CUCM 7.x when you configure the LDAP Authentication portion, the CUCM
>> will be sending Authentication requests to your AD, so the password will
>> still be coming from AD.
>>
>> The PIN will get updated to a set number during the installation of 7.x
>>
>> Regards,
>>
>> Adam
>>
>>
>>
>>
>> ------------Original Message--------------
>> From: Manoj Kalpage <manoj.kalpage at gmail.com> <manoj.kalpage at gmail.com>
>> Sent: Mon, Mar 15, 2010 9:59:19 Am
>> To: Cisco Voip <cisco-voip at puck.nether.net> <cisco-voip at puck.nether.net>
>> CC:
>> Subject: [cisco-voip] ccmuser password and PIN migrate from Ver 4.1 to 7.1
>>
>> Hi All,
>>
>> We have CUCM 4.1 with Active directory integration and ccmuser password
>> manage in active directory. My consultant said that we cannot migrate
>> ccmuser password and PIN to Ver 7.1. We found that DMA tool doesn't carry
>> ccmuser and PIN information to Ver 7.1. Just wondering whether there is any
>> workaround for this.
>>
>> --
>> Best Regards,
>> MK
>>
>>
>>
>> ------------------------------
>>
>>
>>
>> _______________________________________________
>>
>> cisco-voip mailing list
>>
>> cisco-voip at puck.nether.net
>>
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>>
>>
>
>
> --
> Best Regards,
> Manoj
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Best Regards,
Manoj
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100316/03337b97/attachment.html>