[cisco-voip] Mixing PVDM types in a 2811

[Peter Slow]

> Yes.  Technically you can even share the resources of a card that is
> on the motherboard with DSPs on a NM.  This is the purpose of the 'dsp
> services dspfarm' command.

Negative, that is the purpose of the dspfarm command. the dspfarm
command enables dsp sharing across the chassis.

The dsp services dspfarm command enables DSP farming for use as
ccm-registered conferece/transcode resources.

The answe to the specific query is that No, you may _not_ use both
PVDM AND PVDMII at the same time to provide DSPFarm resources to
callmanager from within one IOS Router.

The old DSPs use the old skinny stack (No dsp farm profiles) the New
ones use the New stack, with the DSP Farm profile configs. you may
_not_ use them both at the same time, that is not supported.

you CAN use BOTH types of PVDM Modules at the same time for the
purposes of TDM Voice termination. You may only use ONE at a time for
purposes of registering to callmanager.

-Peter


On Tue, Mar 16, 2010 at 1:30 PM, Nick Matthews <matthnick at gmail.com> wrote:
> Yes.  Technically you can even share the resources of a card that is
> on the motherboard with DSPs on a NM.  This is the purpose of the 'dsp
> services dspfarm' command.
>
>
>
> On Tue, Mar 16, 2010 at 10:22 AM, Mark Holloway <mh at markholloway.com> wrote:
>> Is it possible to populate a 2811 with PVDM2 modules as well as an NM-HDV with PVDM-12 modules and utilize both sets of DSP's?  For example, configure all the PVDM2's for transcoding and the PVDM-12's for conferencing.
>>
>> Thanks,
>> Mark
>>
>>
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>