[cisco-voip] annunciator + howler on v7?

[Ryan Ratliff]

Packet capture or it didn't happen :)

Seriously, do the same from an IP phone and see if the tone is still there.

-Ryan

On Mar 17, 2010, at 9:37 AM, Lelio Fulgenzi wrote:

so i just got two analog ports working on cucm v7.

i dialed the wrong number and was pleasantly surprised by the annunciator (or whatever they call it) telling me the number was invalid.

i wanted to listen to the whole message, which i did, then heard a busy signal. ok. so far so good.

then i get a howler tone in my ear.

i was in our switchroom, with much machine noise, and my ear still hurts.

why would someone put a howler tone at the end of a message?

our coronary rates are gonna go up.

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it. 
                              - LFJ (with apologies to Mr. Popeil)

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100317/5480f50d/attachment.html>