[cisco-voip] UCM 8.0 and 8.1

[Chris Ward (chrward)]

To add to that, CUCM 8.0.2 will be the first release to officially
support VMware but it will only be officially supported on VMware ESXi
4.0 or later running on the UCS B-series chassis and blade. As Ryan said
however, you are good to use CUCM in VMware for lab purposes whenever.

 

+Chris

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
(rratliff)
Sent: Wednesday, March 17, 2010 9:08 AM
To: H, Tim
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] UCM 8.0 and 8.1

 

Not supported just means don't call TAC with any issues, and don't run
your production phone system on it.  All CUCM versions past 5.0(4) have
installed in vmware just fine and later versions even come with a
vmware-specific demo license so you can actually register phones and
such.

 

-Ryan

 

On Mar 17, 2010, at 8:12 AM, H, Tim wrote:





I'm looking at installing UCM 8.0 in a VM environment.  I heard this is
not supported, does anyone know if it can be done?  Also, does anyone
know when UCM will be available for virtualization? I heard 8.1.  Just
wanted to get some input.

 

Thanks,

 

Tim

 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100317/27ff35c2/attachment.html>