[cisco-voip] Adding a 9951 to CUCM 6.1

[Matthew Saskin]

7.1(3) or later is required from what I recall

Matthew Saskin
msaskin at gmail.com
203-253-9571

July 18, 2010 - 1500m swim (in the hudson), 40k bike, 10k run
Please support the Leukemia & Lyphoma Society
http://pages.teamintraining.org/nyc/nyctri10/msaskin


On Fri, Mar 19, 2010 at 12:00 PM, James Dust <
james.dust at charles-stanley.co.uk> wrote:

>  Is anyone using Cisco 9951 IP Phones with CUCM 6.1?
>
> Is this possible?
>
> Regards
>
> James Dust
> Team Leader
> ICT Network Infrastructure & Communications Department
> Charles Stanley & Co Ltd
> Tel: 020 7149 6314
> Mob: 07989 491136
> mailto: *****james.dust at charles-stanley.co.uk*<james.dust at charles-stanley.co.uk>
>
>
> *Consider the environment - Think before you print*
>
> The contents of this email are confidential to the intended recipient and
> may not be disclosed. Although it is believed that this email and
> any attachments are virus free, it is the responsibility of the recipient to
> confirm this.
>
> You are advised that urgent, time-sensitive communications should not be
> sent by email. We hereby give you notice that a delivery receipt does not
> constitute acknowledgement or receipt by the intended recipient(s).
>
> Details of Charles Stanley group companies and their regulators (where
> applicable), can be found at this URL
> http://www.charles-stanley.co.uk/contact-us/disclosure/
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100319/13784424/attachment.html>